GRAFIK — small proof press
Dimensioned sheets (PDF) and BRep solids (STEP) for the fabricated parts, generated from the OpenSCAD sources.
Or open the 3D model in the OpenSCAD playground.
Start hereThe review set →Fabricate
| Part | Material | Stock envelope | Qty | Files |
|---|---|---|---|---|
| aluminum bed platebed | 1/2" 6061-T651 aluminum plate | 36 × 18 × 0.5" | 1 | PDFSTEP |
| carriage side plateside_plate | 1/2" 6061 aluminum | 9.90785 × 0.5 × 4.7805" | 2 | PDFSTEP |
| impression-cylinder bearer diskcylinder_bearer | 6061 aluminum (flange hard-anodized) | 6.08 × 0.8025 × 6.08" | 2 | PDFSTEP |
| impression-cylinder body tubecylinder_tube | 6" OD x 1/2" wall 6061-T6 tube | 6 × 12 × 5.89137" | 1 | PDFSTEP |
| impression-cylinder inboard thrust collarcylinder_collar | 6061 aluminum | 2.25 × 0.12 × 2.25" | 2 | PDFSTEP |
| impression-cylinder tube plugcylinder_endcap | 6061 aluminum | 4.98 × 1 × 4.98" | 2 | PDFSTEP |
| ink distributor rollervibrator | 1.625" OD steel tube | 1.625 × 15 × 1.625" | 1 | PDFSTEP |
| packing-lead retainer strippacking_lead_retainer | aluminum strip | 0.26 × 11 × 0.08" | 1 | PDFSTEP |
| paper-guard cross memberpaper_guard | steel rod (from A7 stock) | 0.5 × 13.375 × 0.5" | 1 | PDFSTEP |
| registration clamp barcylinder_clamp_bar | aluminum | 0.45 × 11 × 0.15" | 2 | PDFSTEP |
| rubber-covered form rollerform_roller | rubber over steel core | 2.25 × 15 × 2.25" | 2 | PDFSTEP |
| steel guide railrail | 7/8" x 1" cold-finished steel bar | 36 × 1 × 0.878" | 2 | PDFSTEP |
UNLESS OTHERWISE NOTED: DIMENSIONS IN INCHES, TOLERANCE ±0.005
Built 2026-10-20 · 12 part(s).